This Morris_et_al_readme20230407.txt file was generated on 20230407 by [Emma Morris] ------------------- GENERAL INFORMATION ------------------- 1. Title of Dataset Panther Tongue - outcrop analog - metric database 2. Author Information Principal Investigator Contact Information Name: Dr Cari Johnson Institution: University of Utah, Geology and Geophysics Address: 115 S 1460 E, Salt Lake City, UT 84112 Email: cari.johnson@utah.edu Associate or Co-investigator Contact Information Name: Dr Emma Morris Institution: University of Utah, Geology and Geophysics Address: 115 S 1460 E, Salt Lake City, UT 84112 Email: emma.morris@utah.edu Alternate Contact Information Name: Claire Atlas Institution: University of Utah, Geology and Geophysics Address: 115 S 1460 E, Salt Lake City, UT 84112 Email: claireatlas0@gmail.com 3. Date of data collection (single date, range, approximate date) 202001-202205 4. Geographic location of data collection (where was data collected?): University of Utah, Salt Lake City 5. Information about funding sources that supported the collection of the data: ConocoPhillips University of Utah Geology and Geophysics department Cooper Hansen Fellowship Chevron Fellowship Dougan Fellowship in Fuels Technology. -------------------------- SHARING/ACCESS INFORMATION -------------------------- 1. Licenses/restrictions placed on the data: CC BY-NC 2. Links to publications that cite or use the data: N/A 3. Links to other publicly accessible locations of the data: N/A 4. Links/relationships to ancillary data sets: N/A 5. Was data derived from another source? If yes, list source(s): It was collected through measurements taken from a series of virtual outcrop models 6. Recommended citation for the data: Morris, E.A., Atlas, C.E., Johnson, C.L., 2023, Architectural analysis of deltaic outcrops using virtual outcrop models - database of measurements --------------------- DATA & FILE OVERVIEW --------------------- 1. File List A. Filename: Panther_Tongue_-_outcrop_analog_-_metric_database Short description: An excel file with 18 individual sheets that detail bed-scale measurements and calculations taken from virtual outcrop models B. Filename: Short description: C. Filename: Short description: 2. Relationship between files: N/A 3. Additional related data collected that was not included in the current data package: Seven virtual outcrop models that cover 13 linear kilometers of outcrop. See additional data package (Morris, E.A., Atlas, C.E., Johnson, C.L., 2023, Architectural analysis of the Panther Tongue - virtual outcrop models) for the models 4. Are there multiple versions of the dataset? no If yes, list versions: Name of file that was updated: i. Why was the file updated? ii. When was the file updated? Name of file that was updated: i. Why was the file updated? ii. When was the file updated? -------------------------- METHODOLOGICAL INFORMATION -------------------------- 1. Description of methods used for collection/generation of data: The data are bed-scale measurements taken from virtual outcrop models (Morris, E.A., Atlas, C.E., Johnson, C.L., 2023, Architectural analysis of the Panther Tongue - virtual outcrop models) and calibrated with measurements taken at outcrop in the field. 2. Methods for processing the data: Bed thinning rates and thickness averages were calculated from original bed thickness data. These are then displayed in graphical format within the excel file. 3. Instrument- or software-specific information needed to interpret the data: Microsoft Excel 4. Standards and calibration information, if appropriate: N/A 5. Environmental/experimental conditions: N/A 6. Describe any quality-assurance procedures performed on the data: N/A 7. People involved with sample collection, processing, analysis and/or submission: Claire Atlas ----------------------------------------- DATA-SPECIFIC INFORMATION FOR: [Panther_Tongue_-_outcrop_analog_-_metric_database] ----------------------------------------- Mastermetrics Page: 1. Number of variables: 37 2. Number of cases/rows: 1513 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital meausured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital meausured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section AH. Name: [Additional notations 1] Description: Additional notes related to bed observations AI. Name: [Additional notations 2] Description: Additional notes related to bed observations AJ. Name: [Additional notations 3] Description: Additional notes related to bed observations AK. Name: [Additional notations 4] Description: Additional notes related to bed observations Access Page - Relates to Access Outcrop area: 1. Number of variables: 33 2. Number of cases/rows: 60 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital measured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital measured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and measured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section Gentile Page - Relates to Gentile Outcrop area: 1. Number of variables: 34 2. Number of cases/rows: 41 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and measured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital measured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital measured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section AH. Name: [Additional notations 1] Description: Additional notes related to bed observations MasterNG_NGandEnvimaps Page - Relates to net to gross calculations per outcrop areas 1. Number of variables: 25 2. Number of cases/rows: 59 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Well #] Description: Number of measured digital section, and location of the measurements C. Name: [X] Description: X location coordinate D. Name: [Y] Description: Y location coordinate E. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches F. Name: [Long] Description: Longitude location coordinate degrees, feet, inches G. Name: [Latcon] Description: Longitude location coordinate degrees H. Name: [Longcon] Description: Longitude location coordinate degrees I. Name: [Total sand] Description: Total sand thickness at the digital measured section location meters J. Name: [Total silt/shale] Description: Total silt/shale thickness at the digital measured section location meters K. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters L. Name: [N/G] Description: Ratio of sand relative to total measured thickness at the digital measured section location M. Name: [% sand] Description: Percentage of sand relative to total measured thickness at the digital measured section location percentage N. Name: [% silt/shale] Description: Percentage of silt/shale relative to total measured thickness at the digital measured section location percentage O. Name: [Prodelta Thickness] Description: Thickness of prodelta facies association at the digital measured section location Meters P. Name: [dDF thickness] Description: Thickness of distal delta front (dDF) facies association at the digital measured section location Meters Q. Name: [pDF thickness] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters R. Name: [MB thickness] Description: Thickness of mudstone (MB) present at the base of the digital measured section location Meters S. Name: [DC thickness] Description: Thickness of distributary channel (DC) facies association at the digital measured section location Meters T. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters U. Name: [% Prodelta] Description: Percentage of prodelta facies association at the digital measured section location Percentage V. Name: [% dDF] Description: Percentage of distal delta front (dDF) facies association at the digital measured section location Percentage W. Name: [% pDF] Description: Percentage of proximal delta front (pDF) facies association at the digital measured section location Percentage X. Name: [% MB] Description: Percentage of mudstone (MB) present at the base of the digital measured section location Percentage Y. Name: [% DC] Description: Percentage of distributary channel (DC) facies association at the digital measured section location Percentage MasterNGGentile - Relates to net to gross calculations at the Gentile outcrop location 1. Number of variables: 26 2. Number of cases/rows: 3 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Well #] Description: Number of measured digital section, and location of the measurements C. Name: [X] Description: X location coordinate D. Name: [Y] Description: Y location coordinate E. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches F. Name: [Long] Description: Longitude location coordinate degrees, feet, inches G. Name: [Latcon] Description: Longitude location coordinate degrees H. Name: [Longcon] Description: Longitude location coordinate degrees I. Name: [Total sand] Description: Total sand thickness at the digital measured section location meters J. Name: [Total silt/shale] Description: Total silt/shale thickness at the digital measured section location meters K. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters L. Name: [N/G] Description: Ratio of sand relative to total measured thickness at the digital measured section location M. Name: [% sand] Description: Percentage of sand relative to total measured thickness at the digital measured section location percentage N. Name: [% silt/shale] Description: Percentage of silt/shale relative to total measured thickness at the digital measured section location percentage O. Name: [Prodelta Thickness] Description: Thickness of prodelta facies association at the digital measured section location Meters P. Name: [dDF thickness] Description: Thickness of distal delta front (dDF) facies association at the digital measured section location Meters Q. Name: [pDF thickness] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters R. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters S. Name: [% Prodelta] Description: Percentage of prodelta facies association at the digital measured section location Percentage T. Name: [% dDF] Description: Percentage of distal delta front (dDF) facies association at the digital measured section location Percentage U. Name: [% pDF] Description: Percentage of proximal delta front (pDF) facies association at the digital measured section location Percentage V. Name: [sand sum] Description: Thickness of sand deposits at the digital measured section location Meters W. Name: [non sand sum] Description: Thickness of non-sand deposits at the digital measured section location Meters X. Name: [pDF sum] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters Y. Name: [dDF sum] Description: Percentage of distal delta front (pDF) facies association at the digital measured section location Meters Z. Name: [prodelta sum] Description: Percentage of prodelta facies association at the digital measured section location Meters MasterNGAccess - Relates to net to gross calculations at the Access outcrop location 1. Number of variables: 26 2. Number of cases/rows: 11 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Well #] Description: Number of measured digital section, and location of the measurements C. Name: [X] Description: X location coordinate D. Name: [Y] Description: Y location coordinate E. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches F. Name: [Long] Description: Longitude location coordinate degrees, feet, inches G. Name: [Latcon] Description: Longitude location coordinate degrees H. Name: [Longcon] Description: Longitude location coordinate degrees I. Name: [Total sand] Description: Total sand thickness at the digital measured section location meters J. Name: [Total silt/shale] Description: Total silt/shale thickness at the digital measured section location meters K. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters L. Name: [N/G] Description: Ratio of sand relative to total measured thickness at the digital measured section location M. Name: [% sand] Description: Percentage of sand relative to total measured thickness at the digital measured section location percentage N. Name: [% silt/shale] Description: Percentage of silt/shale relative to total measured thickness at the digital measured section location percentage O. Name: [Prodelta Thickness] Description: Thickness of prodelta facies association at the digital measured section location Meters P. Name: [dDF thickness] Description: Thickness of distal delta front (dDF) facies association at the digital measured section location Meters Q. Name: [pDF thickness] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters R. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters S. Name: [% Prodelta] Description: Percentage of prodelta facies association at the digital measured section location Percentage T. Name: [% dDF] Description: Percentage of distal delta front (dDF) facies association at the digital measured section location Percentage U. Name: [% pDF] Description: Percentage of proximal delta front (pDF) facies association at the digital measured section location Percentage V. Name: [pDF sum] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters W. Name: [dDF sum] Description: Percentage of distal delta front (pDF) facies association at the digital measured section location Meters X. Name: [prodelta sum] Description: Percentage of prodelta facies association at the digital measured section location Meters Y. Name: [sand sum] Description: Thickness of sand deposits at the digital measured section location Meters Z. Name: [non sand sum] Description: Thickness of non-sand deposits at the digital measured section location Meters MasterNG - Relates to net to gross calculations per each digital measured section 1. Number of variables: 34 2. Number of cases/rows: 31 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Well #] Description: Number of measured digital section, and location of the measurements C. Name: [X] Description: X location coordinate D. Name: [Y] Description: Y location coordinate E. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches F. Name: [Long] Description: Longitude location coordinate degrees, feet, inches G. Name: [Latcon] Description: Longitude location coordinate degrees H. Name: [Longcon] Description: Longitude location coordinate degrees I. Name: [Total sand] Description: Total sand thickness at the digital measured section location meters J. Name: [Total silt/shale] Description: Total silt/shale thickness at the digital measured section location meters K. Name: [Total thickness] Description: Total thickness measured at the digital measured section location meters L. Name: [N/G] Description: Ratio of sand relative to total measured thickness at the digital measured section location M. Name: [% sand] Description: Percentage of sand relative to total measured thickness at the digital measured section location percentage N. Name: [% silt/shale] Description: Percentage of silt/shale relative to total measured thickness at the digital measured section location percentage O. Name: [Prodelta Thickness] Description: Thickness of prodelta facies association at the digital measured section location Meters P. Name: [dDF thickness] Description: Thickness of distal delta front (dDF) facies association at the digital measured section location Meters Q. Name: [pDF thickness] Description: Thickness of proximal delta front (pDF) facies association at the digital measured section location Meters R. Name: [DC thickness] Description: Thickness of distributary channel (DC) facies association at the digital measured section location Meters S. Name: [% Prodelta] Description: Percentage of prodelta facies association at the digital measured section location Percentage T. Name: [% dDF] Description: Percentage of distal delta front (dDF) facies association at the digital measured section location Percentage U. Name: [% pDF] Description: Percentage of proximal delta front (pDF) facies association at the digital measured section location Percentage V. Name: [% DC] Description: Percentage of distributary channel (DC) facies association at the digital measured section location Percentage W. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model X. Name: [Average Prodelta N/G by outcrop] Description: Average ratio of sand within prodelta facies association relative to total measured prodelta facies association thickness per outcrop location Y. Name: [Average dDF N/G by outcrop] Description: Average ratio of sand within distal delta front (dDF) facies association relative to total measured distal delta front (dDF) facies association thickness per outcrop location Z. Name: [Average pDF N/G by outcrop] Description: Average ratio of sand within proximal delta front (pDF) facies association relative to total measured proximal delta front (pDF) facies association thickness per outcrop location AA. Name: [Average DC N/G by outcrop] Description: Average ratio of sand within distributary channel (DC) facies association relative to total measured distributary channel (DC) facies association thickness per outcrop location AB. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model AC. Name: [Outcrop Avg NTG for EoD maps] Description: Average ratio of total sand thickness relative to total measured thickness per outcrop location Mastermetricsconversion page 1. Number of variables: 23 2. Number of cases/rows: 1513 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Latcon] Description: Longitude location coordinate degrees L. Name: [Long] Description: Longitude location coordinate degrees, feet, inches M. Name: [Longcon] Description: Longitude location coordinate degrees MasterNGconversion page 1. Number of variables: 23 2. Number of cases/rows: 1513 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Well #] Description: Number of measured digital section, and location of the measurements C. Name: [X] Description: X location coordinate D. Name: [Y] Description: Y location coordinate E. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches F. Name: [Latconverted] Description: Longitude location coordinate degrees G. Name: [Latcon] Description: Longitude location coordinate degrees H. Name: [Longcon] Description: Longitude location coordinate degrees MaxThickSANDStobemaneuvered page: 1. Number of variables: 52 2. Number of cases/rows: 1513 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital meausured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital meausured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section AH. Name: [Additional notations 1] Description: Additional notes related to bed observations AI. Name: [Additional notations 2] Description: Additional notes related to bed observations AJ. Name: [Additional notations 3] Description: Additional notes related to bed observations AK. Name: [20-sandstone structureless] Description: structureless sandstone present or not AL. Name: [17-sandstone stratified] Description: stratified sandstone present or not AM. Name: [21-sandstone cross stratified] Description: cross-stratified sandstone present or not AN. Name: [Additional notations 4] Description: Additional notes related to bed observations AO. Name: [bed term left] Description: Additional notes related to bed observations AP. Name: [bed term right] Description: Additional notes related to bed observations AQ. Name: [runout length] Description: Additional notes related to bed observations AR. Name: [max bed thickness] Description: maximum thickness of all numbered sandstone beds Meters AS. Name: [bins 0.25] Description: occurrence of beds at 0.25 m thickness intervals AT. Name: [frequency 0.25] Description: frequency of occurrence at 0.25 m thickness intervals AU. Name: [bins 0.1] Description: occurrence of beds at 0.1 m thickness intervals AV. Name: [frequency 0.1] Description: frequency of occurrence at 0.1 m thickness intervals AW. Name: [bins 0.2] Description: occurrence of beds at 0.2 m thickness intervals AX. Name: [frequency 0.2] Description: frequency of occurrence at 0.2 m thickness intervals AY. Name: [outcrop name] Description: Name of outcrop location and corresponding virtual outcrop model AZ. Name: [max bed thickness] Description: maximum thickness of numbered sandstone beds Meters MaxThickSANDStobemaneuvered page: 1. Number of variables: 4 2. Number of cases/rows: 521 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Total runout length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters C. Name: [Bed termination style (left)] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section D. Name: [Bed termination style (right)] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital measured section totalrunoutlengths page: 1. Number of variables: 4 2. Number of cases/rows: 199 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [Total runout length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters C. Name: [Bed termination style (left)] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section D. Name: [Bed termination style (right)] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital measured section histogram data page: 1. Number of variables: 3 2. Number of cases/rows: 199 3. Variable List A. Name: [Maximum sandstone bed thickness #1 (all sandstone beds)] Description: maximum thickness of all numbered sandstone beds Meters B. Name: [Maximum sandstone bed thickness #2 (SG filtered out)] Description: maximum thickness of numbered sandstone beds excluding those measured at Sowbelly Gulch (SG) Meters C. Name: [Bed runout length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters Thinning data page: 1. Number of variables: 42 2. Number of cases/rows: 911 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital meausured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital meausured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section AI. Name: [Bed ID] Description: Bed number AJ. Name: [maximum bed thickness] Description: maximum thickness of all numbered sandstone beds Meters AK. Name: [minimum bed thickness] Description: minimum thickness of all numbered sandstone beds Meters AL. Name: [total runout length] Description: Distance the bed can be mapped and meausured on all of the virtual outcrop models Meters AM. Name: [bed thinning rate] Description: dimensionless number calculated from bed thickness changes over their full runout length AN. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model AO. Name: [maximum bed thickness over 10 m] Description: maximum thickness of all numbered sandstone beds over 10 m at each measurement location Meters AP. Name: [minimum bed thickness over 10 m] Description: minimum thickness of all numbered sandstone beds over 10 m at each measurement location Meters AQ. Name: [difference] Description: difference between the minimum and maximum thicknessess the numbered sandstone beds over 10 m at each measurement location Meters AR. Name: [bed thinning rate over 10 m] Description: dimensionless number calculated from bed thickness changes over 10 m at each measurement location Thinningbyorientation page: 1. Number of variables: 8 2. Number of cases/rows: 911 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [bed thinning rate] Description: dimensionless number calculated from bed thickness changes over their full runout length C. Name: [thinning rate - strike direction] Description: dimensionless number calculated from bed thickness changes over their runout length in the depositional strike direction D. Name: [thinning rate - dip direction] Description: dimensionless number calculated from bed thickness changes over their runout length in the depositional dip direction E. Name: [thinning rate - variable] Description: dimensionless number calculated from bed thickness changes over their runout length in a variable direction F. Name: [average thinning rate - strike direction] Description: average dimensionless number calculated from bed thickness changes over their runout length in the depositional strike direction G. Name: [average thinning rate - dip direction] Description: average dimensionless number calculated from bed thickness changes over their runout length in the depositional dip direction H. Name: [average thinning rate - variable] Description: average dimensionless number calculated from bed thickness changes over their runout length in a variable direction histogram data page: 1. Number of variables: 9 2. Number of cases/rows: 892 3. Variable List A. Name: [Small-scale (<10 m) maximum bed thickness over 10 m] Description: maximum thickness of all numbered sandstone beds over 10 m at each measurement location Meters B. Name: [Small-scale (<10 m) minimum bed thickness over 10 m] Description: minimum thickness of all numbered sandstone beds over 10 m at each measurement location Meters C. Name: [Small-scale (<10 m) difference] Description: difference between the minimum and maximum thicknessess the numbered sandstone beds over 10 m at each measurement location Meters D. Name: [bed thinning rate over 10 m] Description: dimensionless number calculated from bed thickness changes over 10 m at each measurement location E. Name: [Bed ID] Description: Bed number F. Name: [Large-scale (>10 m) maximum bed thickness over 10 m] Description: maximum thickness of all numbered sandstone beds over 10 m at each measurement location Meters G. Name: [Large-scale (>10 m) minimum bed thickness over 10 m] Description: minimum thickness of all numbered sandstone beds over 10 m at each measurement location Meters H. Name: [bed runout length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters I. Name: [bed thinning rate] Description: dimensionless number calculated from bed thickness changes over their full runout length dipandrunoutdata page: 1. Number of variables: 44 2. Number of cases/rows: 879 3. Variable List A. Name: [Unit] Description: Formation or Member name B. Name: [Age] Description: Geologic Age C. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model D. Name: [Well #] Description: Number of measured digital section, and location of the measurements E. Name: [Climate] Description: Paleoclimate at time of deposition F. Name: [Depositional environment] Description: Depositional environment at time of deposition G. Name: [Depositional element] Description: Specific depositional setting within the depositional environment at time of deposition H. Name: [X] Description: X location coordinate I. Name: [Y] Description: Y location coordinate J. Name: [Lat] Description: Latitude location coordinate degrees, feet, inches K. Name: [Long] Description: Longitude location coordinate degrees, feet, inches L. Name: [Latcon] Description: Longitude location coordinate degrees M. Name: [Longcon] Description: Longitude location coordinate degrees N. Name: [Bed ID] Description: Bed number O. Name: [Data type] Description: Bed dip (apparent dip) P. Name: [Rock Type] Description: Rock name (based on grain size and sedimentary structures) Q. Name: [Grain size] Description: Rock grain size (based on the Wentworth scale) R. Name: [Bed thickness] Description: Thickness measurement of bed Meters S. Name: [Bed dip] Description: Dipping angle of beds Degrees T. Name: [Total Runout Length] Description: Distance the bed can be mapped and meausured throughout the virtual outcrop models Meters U. Name: [Bed Termination Style] Description: Description of bed termination (pinchout versus truncation) at that location, if observed V. Name: [Rock type 5 m right] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the right of the original digital measured section W. Name: [Grain size 5 m right] Description: Rock grain size at a location 5 m to the right of the original digital measured section (based on the Wentworth scale) X. Name: [Thickness 5 m right] Description: Thickness measurement of bed at a location 5 m to the right of the original digital measured section Meters Y. Name: [Bed dip 5 m right] Description: Dipping angle of beds at a location 5 m to the right of the original digital measured section Degrees Z. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AA. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the right of the original digital meausured section AB. Name: [Rock type 5 m left] Description: Rock name (based on grain size and sedimentary structures) at a location 5 m to the left of the original digital meausured section AC. Name: [Grain size 5 m left] Description: Rock grain size at a location 5 m to the left of the original digital measured section (based on the Wentworth scale) AD. Name: [Thickness 5 m left] Description: Thickness measurement of bed at a location 5 m to the left of the original digital measured section Meters AE. Name: [Bed dip 5 m left] Description: Dipping angle of beds at a location 5 m to the left of the original digital measured section Degrees AF. Name: [Runout Length] Description: Distance the bed can be mapped and meausured on the virtual outcrop models Meters AG. Name: [Bed Termination] Description: Description of bed termination (pinchout versus truncation) if observed, at a location 5 m to the left of the original digital measured section AH. Name: [Additional notations 1] Description: Additional notes related to bed observations AI. Name: [Additional notations 2] Description: Additional notes related to bed observations AJ. Name: [Additional notations 3] Description: Additional notes related to bed observations AK. Name: [Additional notations 4] Description: Additional notes related to bed observations AL. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model AM. Name: [bed dip (middle)] Description: Dip of beds in the middle digital measured section degrees AN. Name: [bed dip (5 m right)] Description: Dip of beds, 5 m to the right of the original middle digital measured section location degrees AO. Name: [bed dip (5 m left)] Description: Dip of beds, 5 m to the left of the original middle digital measured section location degrees AP. Name: [Bed ID] Description: Bed number AQ. Name: [average bed dip] Description: average bed dip of numbered bed AR. Name: [total runout length] Description: Distance the numbered bed can be mapped and meausured on the virtual outcrop models Meters dip data for fig page: 1. Number of variables: 4 2. Number of cases/rows: 902 3. Variable List A. Name: [Outcrop Name] Description: Name of outcrop location and corresponding virtual outcrop model B. Name: [bed dip (middle)] Description: Dip of beds in the middle digital measured section degrees C. Name: [bed dip (5 m right)] Description: Dip of beds, 5 m to the right of the original middle digital measured section location degrees D. Name: [bed dip (5 m left)] Description: Dip of beds, 5 m to the left of the original middle digital measured section location degrees 4. Missing data codes: N/A Code/symbol Definition Code/symbol Definition 5. Specialized formats of other abbreviations used